Table of Contents
In 2026, the 8Bitdo Pro 2 remains a popular choice for gamers due to its versatility and compatibility. Learning how to pair it with multiple devices efficiently can enhance your gaming experience across various platforms. This guide provides step-by-step instructions to help you set up your controller with multiple devices seamlessly.
Understanding the 8Bitdo Pro 2 Bluetooth Pairing Modes
The 8Bitdo Pro 2 supports multiple Bluetooth pairing modes, allowing you to connect to different devices such as PCs, consoles, and mobile devices. It features a dedicated pairing button and a mode switch that determines the current connection mode. Familiarizing yourself with these modes is essential for efficient multi-device pairing.
Preparing Your Devices for Pairing
Before pairing, ensure that each device’s Bluetooth is enabled and ready to discover new devices. For best results, update your device firmware if updates are available, and ensure the 8Bitdo Pro 2 has fresh batteries or is fully charged to avoid disconnections during setup.
Step 1: Turn On Your 8Bitdo Pro 2
Press and hold the Start button for about 3 seconds until the LED indicator blinks rapidly, indicating the controller is in pairing mode.
Step 2: Set the Controller to the Correct Mode
Use the Mode switch on the back of the controller to select the desired mode. For example, switch to “X” mode for Windows and Android devices, or “Switch” mode for Nintendo Switch compatibility. The LED indicator will show which mode is active.
Pairing the Controller with Multiple Devices
To connect your 8Bitdo Pro 2 to multiple devices, repeat the pairing process for each device, switching modes as needed. Here are detailed steps for each device type.
Pairing with a Windows PC
1. Set the controller to “X” mode.
2. On your PC, open the Bluetooth settings and select “Add Bluetooth or other device.”
3. Choose “Bluetooth” and select “8Bitdo Pro 2” from the list of available devices.
4. Confirm pairing if prompted. The LED will stabilize once connected.
Pairing with an Android Device
1. Switch the controller to “X” mode.
2. Enable Bluetooth on your Android device and scan for new devices.
3. Select “8Bitdo Pro 2” from the list of available devices.
4. Complete the pairing process as instructed on your device.
Pairing with a Nintendo Switch
1. Change the controller to “Switch” mode using the mode switch.
2. Hold the pairing button on the back until the LED blinks rapidly.
3. On your Nintendo Switch, go to “Controllers” > “Bluetooth Controllers” and select “8Bitdo Pro 2.”
4. Wait for the connection confirmation. The LED will turn solid once paired.
Switching Between Devices
To switch between paired devices, turn off the controller and switch to the desired mode. Then, repeat the pairing process if necessary or reconnect via Bluetooth settings on your device. The controller remembers previous pairings, making reconnection quick and easy.
Troubleshooting Tips
- Ensure your devices are within Bluetooth range and free from interference.
- Update the controller firmware via the 8Bitdo software for optimal compatibility.
- Reset the controller by holding the pairing button for 10 seconds if it fails to connect.
- Remove old pairings from your devices to avoid confusion.
With these steps, you can easily switch your 8Bitdo Pro 2 between multiple devices in 2026, maximizing your gaming flexibility and enjoyment.