Unboxing and Hardware Overview

by

The Ubiquiti Unifi G4 Pro is a powerful camera designed for professional surveillance solutions. Setting it up correctly ensures seamless monitoring and high-quality video footage. This guide walks you through the essential steps to configure your G4 Pro for optimal performance.

Unboxing and Hardware Overview

Before beginning the setup, unbox your G4 Pro camera and check for all included accessories, such as mounting brackets, power adapters, and Ethernet cables. Familiarize yourself with the camera’s features, including its 4K resolution, built-in microphone, and infrared night vision capabilities.

Connecting the Camera

Connect the G4 Pro to your network using an Ethernet cable. For PoE (Power over Ethernet) setups, connect the Ethernet cable to a PoE switch or injector. Power on the camera and wait for it to initialize, indicated by the status LEDs.

Accessing the Unifi Network Controller

Ensure your computer or mobile device is connected to the same network as the camera. Open a web browser and navigate to the Unifi Network Controller software, which manages your devices. If you haven’t installed it, download it from Ubiquiti’s official website.

Adopting the Camera

In the Network Controller, locate your new G4 Pro device under the “Devices” tab. Click “Adopt” to add the camera to your network. Wait for the adoption process to complete, indicated by the device status changing to “Connected.”

Configuring Camera Settings

Once adopted, access the camera’s settings to customize its operation:

  • Resolution: Set to 4K for high-quality footage.
  • Night Vision: Enable infrared mode for nighttime surveillance.
  • Motion Detection: Configure detection zones and sensitivity.
  • Recording Schedule: Define when recordings should occur.

Mounting and Positioning

Choose a strategic location for your G4 Pro, considering coverage area and lighting conditions. Use the included mounting bracket to secure the camera firmly. Ensure the camera’s field of view is unobstructed and covers critical areas.

Final Testing and Monitoring

After installation, verify the camera’s live feed through the Unifi Controller or mobile app. Test motion detection and recording features to confirm proper operation. Regularly check firmware updates to keep your camera secure and functioning optimally.

Troubleshooting Tips

If you encounter issues:

  • Ensure the camera is receiving power and network connectivity.
  • Reboot the camera and the network device if needed.
  • Check for firmware updates in the Unifi Controller.
  • Review network settings to prevent port conflicts or firewall restrictions.

With proper setup, your Ubiquiti Unifi G4 Pro will deliver reliable, high-quality surveillance footage, enhancing your security system seamlessly.