Setting Up User Codes On Schlage Encode Plus: A Quick Guide For Homeowners

by

Installing a smart lock like the Schlage Encode Plus can enhance your home’s security and convenience. One of the key features is setting up user codes, which allow multiple users to access your home without physical keys. This guide walks homeowners through the simple steps to set up user codes on the Schlage Encode Plus.

Understanding User Codes on Schlage Encode Plus

The Schlage Encode Plus lock allows you to create multiple user codes, each associated with a specific person or purpose. These codes can be temporarily or permanently active, giving you control over who can access your home and when. Managing user codes is done via the Schlage Home app or directly on the lock’s keypad.

Preparing to Set Up User Codes

Before starting, ensure your lock is properly installed and connected to your Wi-Fi network. Download the Schlage Home app from your device’s app store. Create or log into your Schlage account. Make sure your smartphone is connected to the same Wi-Fi network that your lock uses.

Adding a New User Code via the App

Follow these steps to add user codes through the Schlage Home app:

  • Open the Schlage Home app and select your lock from the device list.
  • Tap on the “User Management” or “Codes” section.
  • Choose “Add User” or “Create New Code.”
  • Enter a unique name for the user (e.g., “Guest” or “Family Member”).
  • Set a four- to eight-digit code for this user.
  • Specify if the code should be permanent or temporary, and set an expiration date if needed.
  • Save the new user code.

The new user code is now active and can be used to unlock the door. You can repeat this process to add multiple users as needed.

Adding User Codes Directly on the Lock

If you prefer to set up user codes directly on the lock without the app, follow these steps:

  • Ensure the lock is in an unlocked state.
  • Enter your administrator code (default is usually 12345, but change it for security).
  • Press the “Schlage” or “Menu” button to access programming mode.
  • Press the “User” or “Code” button.
  • Enter a new four- to eight-digit user code.
  • Press the “Save” or “Enter” button to confirm.

The user code is now programmed directly into the lock. Repeat the process for additional codes.

Managing and Deleting User Codes

To keep your lock secure, regularly review and delete unused or forgotten user codes. This can be done via the app or directly on the lock:

  • Open the app and navigate to “User Management.”
  • Select the user code you wish to delete.
  • Tap “Delete” or “Remove.”
  • Confirm the deletion.
  • On the lock, enter programming mode and follow similar steps to delete codes manually.

Troubleshooting Tips

If you encounter issues with user codes not working, ensure:

  • The lock is connected to Wi-Fi and the app is synced.
  • The user code is correctly entered without extra spaces or errors.
  • The code has not expired or been deleted.
  • The lock firmware is up to date.

For persistent problems, reset the lock to factory settings and reprogram user codes from scratch.

Conclusion

Setting up user codes on the Schlage Encode Plus is a straightforward process that enhances your home security and convenience. Whether using the app or the lock directly, managing access has never been easier. Regularly update and review user codes to maintain control over who can access your home.