Table of Contents
Setting up the Ubiquiti Unifi G4 Pro with the Unifi Controller is an essential process for creating a reliable and high-performance surveillance system. This tutorial guides you through each step to ensure a smooth installation and configuration.
Prerequisites and Equipment
- Ubiquiti Unifi G4 Pro camera
- Unifi Controller software (installed on a PC, Mac, or cloud key)
- Power over Ethernet (PoE) switch or injector
- Ethernet cables
- Stable internet connection
- Access to your network’s admin credentials
Installing the Unifi Controller
Download the latest Unifi Controller software from Ubiquiti’s official website. Follow the installation prompts suitable for your operating system. Once installed, launch the Controller and complete the initial setup wizard.
Connecting the G4 Pro Camera
Connect the G4 Pro camera to your network using an Ethernet cable connected to your PoE switch or injector. Power on the camera; it should automatically start booting up. Ensure your network allows device discovery.
Adopting the Camera in the Controller
Open the Unifi Controller interface. Navigate to the “Devices” section. The G4 Pro should appear as a “Pending Adoption.” Click “Adopt” to integrate it into your network management system.
Configuring the Camera Settings
After adoption, configure the camera settings such as name, location, and recording preferences. You can set motion detection, recording schedules, and streaming quality according to your needs.
Updating Firmware
Check for firmware updates in the Controller. Keeping firmware up-to-date ensures security and access to new features. Follow the prompts to download and install updates if available.
Finalizing the Setup
Verify the camera’s live feed, recording, and motion detection. Adjust settings as needed. Place the camera in its final position, ensuring it has a clear view of the desired area.
Accessing the Camera Remotely
Configure remote access through your network’s port forwarding or VPN setup. This allows you to view camera feeds and manage settings from anywhere securely.
Troubleshooting Tips
- If the camera does not appear in the Devices list, check network connections and PoE power.
- Ensure your firewall settings permit communication between the Controller and the camera.
- Update the Controller and camera firmware regularly.
- Consult Ubiquiti support or community forums for persistent issues.
Conclusion
Setting up the Ubiquiti Unifi G4 Pro with the Unifi Controller is straightforward with proper planning and following these steps. Once configured, you will have a robust surveillance system capable of monitoring your property effectively.