Preparing Your Device and Speaker

by

Connecting your device to the Ultimate Ears Boom 4 speaker is a simple process that allows you to enjoy high-quality sound wherever you go. Whether you’re using a smartphone, tablet, or computer, following these quick steps will ensure a seamless pairing experience.

Preparing Your Device and Speaker

  • Ensure your device has Bluetooth enabled.
  • Charge your Ultimate Ears Boom 4 to at least 50% to prevent interruptions during pairing.
  • Turn on your Boom 4 by pressing the power button located on the top of the speaker.

Pairing Your Device with the Boom 4

Follow these steps for a quick pairing process:

  • Activate Bluetooth on your device. On most smartphones, this can be done through Settings > Bluetooth.
  • Press and hold the Bluetooth button on the Boom 4 until the LED indicator begins to flash rapidly. This indicates the speaker is in pairing mode.
  • On your device, scan for available Bluetooth devices. The Boom 4 should appear as UE BOOM 4.
  • Select UE BOOM 4 from the list of available devices.
  • If prompted, confirm the pairing by accepting any prompts or entering a default PIN such as 0000 or 1234.

Once connected, the LED on the Boom 4 will turn solid, indicating a successful pairing. You can now play audio from your device through the speaker.

Tips for a Faster Pairing Experience

  • Keep your device and the Boom 4 close during the pairing process.
  • Ensure no other devices are actively trying to connect to the speaker to avoid interference.
  • Update your device’s Bluetooth software and the Boom 4 firmware for optimal performance.
  • Turn off other Bluetooth devices that are not in use to reduce connection conflicts.

Reconnecting to the Boom 4

Once paired, your device will remember the connection. To reconnect in the future:

  • Ensure the Boom 4 is turned on.
  • Enable Bluetooth on your device.
  • Select UE BOOM 4 from your list of paired devices.

If the device does not reconnect automatically, repeat the pairing process or turn the speaker off and on again.

Troubleshooting Common Issues

If you encounter problems pairing your device with the Boom 4:

  • Make sure the speaker is in pairing mode (flashing blue LED).
  • Restart your device and try pairing again.
  • Reset the Boom 4 by pressing the Bluetooth and volume down buttons simultaneously for a few seconds.
  • Check for firmware updates via the Ultimate Ears app or their website.

Following these steps will help you quickly connect your device to the Ultimate Ears Boom 4 and enjoy your music without delay.