Table of Contents
Welcome to the comprehensive setup guide for the Minisforum Ms-01 mini PC. This article will walk you through each step, from unboxing to powering on your device for the first time.
Unboxing Your Minisforum Ms-01
Carefully open the box and ensure all components are present. You should find the mini PC, power adapter, HDMI cable, and user manual.
Connecting the Hardware
Place the Minisforum Ms-01 on a stable surface near your monitor. Connect the HDMI cable from the mini PC to your monitor. Plug the power adapter into the device and then into a power outlet.
Initial Power On
Press the power button located on the front or side of the device. The system should power on, and you will see the boot screen on your monitor.
First Boot Setup
Upon first boot, the system may prompt you to configure basic settings such as language, time zone, and network connection. Follow the on-screen instructions to complete these steps.
Connecting to Wi-Fi
Select your Wi-Fi network from the available options. Enter the password when prompted to establish an internet connection.
Installing Updates and Software
Check for system updates to ensure your device runs the latest firmware and software. Follow the prompts to download and install updates if available.
Configuring Your System
Customize your settings, including display preferences, user accounts, and privacy options. Install any additional software needed for your tasks.
Final Checks
Verify that all peripherals are working correctly, including keyboard, mouse, and external drives. Restart the device to confirm stability.
Congratulations! Your Minisforum Ms-01 is now set up and ready to use.