Table of Contents
Upgrading the RAM and storage on your UM790 Pro can significantly enhance its performance and extend its lifespan. This guide provides step-by-step instructions to help you perform these upgrades safely and easily, whether you’re a beginner or experienced user.
Preparation Before Upgrading
Before starting the upgrade process, gather the necessary tools and ensure you have compatible components. Proper preparation minimizes risks and ensures a smooth upgrade.
- Phillips-head screwdriver
- Anti-static wrist strap
- Compatible RAM modules (check your device specifications)
- Compatible SSD or HDD (check your device specifications)
- Clean workspace with good lighting
Safety Precautions
Always power off and unplug your UM790 Pro before opening it. Use an anti-static wrist strap to prevent static electricity damage. Handle components by their edges and avoid touching circuitry.
Upgrading RAM
Follow these steps to upgrade the RAM on your UM790 Pro:
Step 1: Access the RAM Slots
Remove the back cover of your device carefully using the screwdriver. Locate the RAM slots, which are usually near the CPU and marked clearly.
Step 2: Remove Existing RAM (if applicable)
If replacing existing modules, gently push the clips on either side of the RAM stick outward. The module will pop up at an angle. Carefully pull it out.
Step 3: Install New RAM
Align the notch on the new RAM module with the key in the slot. Insert the module at a 30-degree angle and press down until the clips click into place.
Upgrading Storage
To upgrade storage, follow these steps:
Step 1: Locate the Storage Drive
In the same access panel, find the existing SSD or HDD. It is usually secured with screws and connected via a SATA or NVMe interface.
Step 2: Remove the Old Drive
Unscrew the drive carefully and disconnect any cables. Gently lift the drive out of its bay.
Step 3: Install the New Drive
Connect the new drive to the interface, secure it with screws, and ensure all connections are firm. Close the back cover securely.
Final Steps
After completing the hardware upgrades, reconnect your device, power it on, and enter the BIOS to verify that the new RAM and storage are recognized. Proceed to install or clone your operating system if necessary.
Conclusion
Upgrading your UM790 Pro’s RAM and storage can be straightforward when following proper safety procedures and steps. Take your time, double-check connections, and enjoy the improved performance of your upgraded device.