How To Upgrade Ram And Storage In Your Msi Prestige 13 Evo Safely

by

Upgrading the RAM and storage of your MSI Prestige 13 Evo can significantly enhance its performance and extend its lifespan. However, performing these upgrades safely is essential to avoid damaging your device or voiding your warranty. This guide provides a step-by-step approach to upgrading your laptop’s memory and storage components securely.

Preparation Before Upgrading

Before beginning the upgrade process, gather all necessary tools and ensure you have a clean, static-free workspace. Proper preparation helps prevent accidental damage and makes the process smoother.

Tools Needed

  • Small Phillips-head screwdriver
  • Plastic pry tools or spudger
  • Anti-static wrist strap
  • Replacement RAM modules
  • Compatible SSD storage (NVMe M.2)

Safety Precautions

  • Power off the laptop and disconnect all cables.
  • Remove the battery if possible, or ensure the device is unplugged.
  • Wear an anti-static wrist strap to prevent static damage.
  • Work on a clean, static-free surface.

Accessing the Internal Components

To upgrade the RAM and storage, you need to access the internal components. Follow these steps carefully:

Removing the Bottom Cover

  • Use the Phillips-head screwdriver to remove all screws securing the bottom cover.
  • Use a plastic pry tool to gently loosen the cover from the chassis, starting at a corner.
  • Carefully lift the cover away, taking care not to damage any internal cables or connectors.

Upgrading RAM

The MSI Prestige 13 Evo typically has one or two RAM slots. Confirm the configuration before proceeding.

Replacing or Adding RAM Modules

  • If replacing, gently release the existing RAM module by pushing the clips outward.
  • Align the new RAM module with the slot, ensuring the notch matches the key.
  • Press down firmly until the clips snap into place, securing the module.

Upgrading Storage

The MSI Prestige 13 Evo uses an M.2 NVMe SSD for storage. Replacing or adding an SSD involves the following steps:

Replacing or Installing an M.2 SSD

  • Locate the M.2 slot on the motherboard.
  • Remove the screw securing the current SSD, if present.
  • Gently slide the existing SSD out of the slot.
  • Insert the new SSD at a 30-degree angle, then press down flat.
  • Screw the new SSD into place.

Reassembling the Laptop

Once upgrades are complete, reassemble your laptop carefully:

  • Place the bottom cover back onto the chassis.
  • Secure it with all screws removed earlier.
  • Reconnect the battery if it was removed.
  • Reconnect all cables and peripherals.

Final Steps and Testing

Power on your laptop and enter the BIOS or system settings to verify the new RAM and storage are recognized. If everything appears correct, proceed to boot into your operating system.

Run diagnostic tools or system information software to confirm the successful upgrade. If issues arise, double-check connections and compatibility.

Conclusion

Upgrading your MSI Prestige 13 Evo’s RAM and storage can boost performance and extend its usability. Follow these steps carefully, prioritize safety, and enjoy your enhanced laptop experience.