Table of Contents
Getting your Potensic Atom Se 2026 ready for flight involves several steps to ensure optimal performance and safety. Follow this guide to set up your drone correctly in 2026.
Unboxing and Initial Inspection
Start by carefully unboxing your Potensic Atom Se 2026. Check for any visible damage and ensure all components are included, such as the drone, remote controller, batteries, charging cables, and spare parts.
Charging the Batteries
Insert the batteries into the drone and remote controller. Connect the chargers to a power source and allow the batteries to fully charge before your first flight. This ensures maximum flight time and battery health.
Installing the Propellers
Attach the propellers securely to the drone’s motors. Make sure to match the propeller colors and markings to the corresponding motor ports for balanced flight. Tighten the screws firmly but avoid over-tightening.
Calibrating the Compass and IMU
Power on the drone and remote control. Follow the manufacturer’s instructions to calibrate the compass and inertial measurement unit (IMU). Proper calibration is critical for stable flight and accurate navigation.
Connecting the Drone to the App
Download the Potensic app on your smartphone or tablet. Enable Bluetooth or Wi-Fi as required. Follow the app instructions to connect your device to the drone, enabling you to access flight modes and settings.
Pre-Flight Checks
- Ensure the propellers are securely attached.
- Check the battery levels on the drone and remote.
- Verify GPS signal strength for accurate positioning.
- Calibrate compass and IMU if needed.
- Remove any obstacles from the takeoff area.
Performing a Test Flight
Choose an open, flat area for your first flight. Power on the drone and remote, then perform a gentle hover to test stability. Adjust settings via the app if necessary for optimal performance.
Post-Flight Maintenance
After flying, turn off the drone and remote. Remove the batteries and store all components in a safe, dry place. Regularly check for firmware updates through the app to keep your drone functioning at its best.