Table of Contents
Setting up dual-WAN on your Asus RT-AX88U Pro can significantly improve your network’s reliability and bandwidth. This guide walks you through the process of enabling and configuring load balancing using dual-WAN on your router.
Prerequisites
- Asus RT-AX88U Pro router with the latest firmware installed
- Two active internet connections (e.g., fiber and LTE)
- Ethernet cables for connecting modems to the router
- Admin access to the router’s web interface
Accessing the Router
Connect your computer to the router via Ethernet or Wi-Fi. Open a web browser and enter 192.168.1.1 in the address bar. Log in with your administrator credentials.
Enabling Dual-WAN
Navigate to the Advanced Settings menu, then select WAN. In the WAN settings, locate the Dual WAN option and enable it.
Connecting the WAN Ports
Connect your primary internet source to the WAN port. Connect the secondary source to the WAN 2 port. Ensure both connections are active and functioning.
Configuring Load Balancing
Within the WAN settings, locate the Load Balancing section. Enable load balancing and select your preferred mode:
- Round Robin: Distributes traffic evenly across both connections
- Weighted: Assigns more traffic to the faster connection
Adjust the weights if you choose the weighted mode. Save your settings to apply the changes.
Additional Configuration
To enhance stability, configure failover settings. Enable automatic failover so that if one connection drops, traffic automatically switches to the other.
Setting Up Failover
In the WAN settings, go to the Failover & Load Balancing tab. Enable Automatic Failover and set the detection parameters.
Testing Your Setup
Disconnect one of your internet sources to verify failover. Check if the router automatically switches to the active connection without interruption.
Use speed testing tools to ensure load balancing distributes traffic as configured.
Conclusion
Enabling dual-WAN with load balancing on the Asus RT-AX88U Pro enhances your network’s performance and reliability. Proper configuration ensures seamless internet access even if one connection fails. Regularly monitor your setup and adjust settings as needed for optimal performance.