Guide To Installing Linux On The Beelink Ser6 Pro

by

Installing Linux on the Beelink Ser6 Pro can significantly enhance your device’s flexibility and performance. This guide provides step-by-step instructions to help you achieve a smooth installation process.

Prerequisites

  • A compatible USB flash drive (at least 8GB)
  • Linux distribution ISO file (e.g., Ubuntu, Fedora)
  • Access to a Windows or existing Linux system for creating bootable media
  • Beelink Ser6 Pro with BIOS access
  • Backup of important data

Creating Bootable Linux USB Drive

Use tools like Rufus (Windows) or balenaEtcher (Windows/Linux/macOS) to create a bootable USB drive from your Linux ISO file. Follow these steps:

  • Download and install Rufus or balenaEtcher.
  • Insert your USB drive into the computer.
  • Select the ISO file and the USB drive in the tool.
  • Start the creation process and wait for completion.

Power off the device. Turn it on and immediately press the BIOS access key, typically Delete or F2. Refer to your device manual if unsure.

Configuring BIOS Settings

  • Set the boot order to prioritize USB devices.
  • Disable Secure Boot if enabled.
  • Enable Legacy Boot mode if required by your Linux distribution.
  • Save changes and exit BIOS.

Installing Linux

Insert the bootable USB drive into the Beelink Ser6 Pro and restart. It should boot into the Linux installer. Follow these steps:

  • Select “Try Linux” or “Install Linux” from the boot menu.
  • Follow the on-screen prompts to choose language, keyboard layout, and timezone.
  • Partition your drive as needed, choosing options like “Erase disk and install” for a clean install.
  • Set up user accounts and passwords.
  • Begin the installation process and wait for it to complete.

Post-Installation Steps

Once Linux is installed, remove the USB drive and reboot the device. Enter BIOS again if necessary to set the primary boot device to the internal drive. Update your system and install additional drivers as needed.

Updating Your System

  • Open a terminal window.
  • Run commands such as sudo apt update && sudo apt upgrade for Ubuntu-based distributions.
  • Reboot your system after updates are complete.

Conclusion

Installing Linux on the Beelink Ser6 Pro unlocks a world of customization and open-source tools. Follow these steps carefully, and enjoy a versatile computing experience.