Guide To Connecting Trust Gxt 256 Exxo To Mobile Devices

by

Connecting your Trust GXT 256 Exxo gaming controller to a mobile device can enhance your gaming experience by providing better control and comfort. This guide walks you through the steps to establish a seamless connection between your device and the controller.

Preparing Your Devices

Before connecting, ensure your mobile device and the Trust GXT 256 Exxo are ready. Check that your device has Bluetooth enabled and that the controller has sufficient battery life.

Turning On the Controller

Press and hold the power button on the Trust GXT 256 Exxo until the LED indicator starts blinking. This indicates the controller is in pairing mode.

Connecting via Bluetooth

Follow these steps to pair your controller with your mobile device:

  • Open the Settings app on your mobile device.
  • Navigate to Bluetooth settings and ensure Bluetooth is turned on.
  • In the list of available devices, look for “Trust GXT 256 Exxo” or similar.
  • Tap on the controller’s name to initiate pairing.

If prompted for a PIN, enter “0000” or “1234” as these are common default codes.

Verifying the Connection

Once paired, the LED indicator on the controller should stop blinking and remain steady. Your device may also display a confirmation message.

Troubleshooting Tips

If you encounter issues connecting your controller, try the following:

  • Ensure the controller is within range (typically 10 meters).
  • Turn Bluetooth off and on again on your device.
  • Restart the controller by turning it off and then on again.
  • Remove the controller from your device’s Bluetooth paired devices list and try pairing again.

Using the Controller

After successful pairing, open your preferred gaming app. The Trust GXT 256 Exxo should now function as a controller, providing enhanced gameplay control.

Disconnecting the Controller

To disconnect, simply turn off the controller by pressing and holding the power button until the LED indicator turns off. You can also disconnect via Bluetooth settings on your device.

Additional Tips

For optimal performance, keep your controller firmware updated if applicable. Refer to the Trust website or user manual for firmware update instructions.