Table of Contents
Building a PC for the first time can be an exciting yet daunting experience. The Gigabyte B760 Aorus Elite AX motherboard offers a robust platform for new builders, combining ease of use with advanced features. This guide walks you through the setup process step-by-step to ensure a smooth build.
Preparation Before Assembly
Before starting, gather all necessary components and tools. You will need:
- Gigabyte B760 Aorus Elite AX motherboard
- Compatible CPU (e.g., Intel 13th Gen)
- Memory modules (RAM)
- Power supply unit (PSU)
- Storage devices (SSD/HDD)
- Case compatible with ATX form factor
- Screwdriver
- Thermal paste (if not pre-applied)
Ensure your workspace is static-free and well-lit. It’s also helpful to read the motherboard manual for specific details.
Installing the CPU
Begin by opening the CPU socket latch on the motherboard. Carefully align the CPU’s golden triangle with the socket’s marking. Gently place the CPU into the socket without forcing it. Secure the latch back into position.
Installing RAM Modules
Locate the RAM slots on the motherboard. Open the clips at each end of the slot. Align the notch on the RAM module with the key in the slot. Firmly press down until the clips snap into place.
Mounting the Motherboard in the Case
Place the I/O shield into the case’s rear opening. Carefully align the motherboard with the standoffs in the case. Insert screws into the mounting holes and tighten securely, avoiding overtightening.
Connecting Power and Data Cables
Connect the 24-pin ATX power cable and the 8-pin CPU power cable from the PSU to the motherboard. Attach storage device cables (SATA or NVMe) as needed. Connect case fans and front panel connectors following the motherboard manual.
Installing Storage Devices and GPU
Secure your SSD or HDD into the appropriate drive bays or M.2 slots. Insert the GPU into the PCIe x16 slot, securing it with screws. Connect power cables to the GPU if required.
Initial Power-On and BIOS Setup
Connect a monitor, keyboard, and mouse. Power on the system. Enter the BIOS by pressing the designated key (usually DEL or F2). Verify component detection and set preferences such as boot order. Save and exit BIOS.
Installing Operating System
Insert a bootable USB drive with your preferred OS installer. Restart the system and boot from the USB. Follow on-screen instructions to complete the OS installation.
Final Checks and Updates
After installing the OS, update motherboard firmware and drivers from Gigabyte’s official website. Ensure all components function correctly and perform stress tests if desired.
Conclusion
With these steps, your Gigabyte B760 Aorus Elite AX-based PC build is complete. Enjoy your new system and explore its capabilities. Happy building!