Table of Contents
The Arlo Go 2 is a versatile wireless security camera designed for outdoor use. Proper mounting and securing are essential to ensure optimal performance and safety. This guide provides step-by-step instructions to help you mount and secure your Arlo Go 2 effectively.
Preparing for Installation
Before beginning the installation process, gather all necessary tools and accessories. Ensure your mounting location has a stable power source and a strong Wi-Fi signal for uninterrupted operation.
- Arlo Go 2 camera and mounting kit
- Drill and drill bits
- Screwdriver
- Level
- Measuring tape
- Pencil or marker
- Weatherproof screws and anchors (if mounting on masonry or brick)
Choosing the Mounting Location
Select a location that offers a clear view of the area you want to monitor. Consider height, angle, and potential obstructions. Avoid mounting in direct sunlight or areas prone to heavy rain without proper weatherproofing.
Factors to Consider
- Coverage area
- Wi-Fi signal strength
- Power outlet accessibility
- Protection from vandalism or tampering
- Weather conditions
Mounting the Arlo Go 2
Follow these steps to securely mount your Arlo Go 2:
Marking the Mounting Points
Use the mounting bracket as a template to mark screw positions with a pencil. Ensure the camera is positioned at the desired angle before marking.
Drilling and Attaching the Mount
Drill holes at the marked points. Insert anchors if mounting on masonry or brick. Attach the mounting bracket securely using screws and a screwdriver.
Mounting the Camera
Attach the Arlo Go 2 to the mounted bracket. Adjust the camera angle to cover the desired area. Tighten any adjustment screws to lock the position.
Securing the Camera
Securing your camera involves both physical and network security measures to prevent tampering and unauthorized access.
Physical Security Tips
- Mount the camera out of reach of children or vandals.
- Use tamper-proof screws if available.
- Install protective covers or enclosures if necessary.
Network Security Tips
- Use a strong, unique Wi-Fi password.
- Enable WPA3 encryption on your router.
- Regularly update the camera firmware.
- Disable UPnP and port forwarding unless needed.
Testing and Final Adjustments
Once mounted, power on the camera and connect it to your network. Use the Arlo app to view live footage and adjust the camera angle as needed. Confirm the camera’s view covers the intended area and make any final adjustments.
Maintenance and Troubleshooting
Regularly check the camera’s physical condition and clean the lens for clear footage. Ensure firmware updates are installed promptly. If issues arise, verify power connections, Wi-Fi signal strength, and mounting stability.
Proper mounting and securing of your Arlo Go 2 ensure reliable surveillance and peace of mind. Follow these guidelines for a secure and effective setup.