Bambu Lab P1S 2026 Setup Guide: From Unboxing To First Print In 2026

by

Welcome to the comprehensive setup guide for the Bambu Lab P1S 2026. Whether you’re a beginner or an experienced maker, this guide will walk you through every step from unboxing to your very first print in 2026.

Unboxing Your Bambu Lab P1S 2026

Carefully open the packaging and remove the printer and all included accessories. Ensure you have the following items:

  • Bambu Lab P1S 2026 printer
  • Power cable
  • Filament spool
  • Tools for assembly
  • User manual and quick start guide

Initial Setup and Assembly

Place the printer on a stable, level surface. Follow these steps to assemble and prepare your printer:

  • Remove protective films from the components.
  • Install the filament spool holder if not pre-installed.
  • Connect the power cable to the printer and plug it into an outlet.
  • Power on the printer using the main switch.

Initial Calibration

Calibrating your printer ensures optimal print quality. Follow these steps:

  • Navigate to the calibration menu on the touchscreen interface.
  • Run the bed leveling process, following on-screen instructions.
  • Check the nozzle height and adjust if necessary.
  • Perform a test extrusion to verify filament flow.

Loading Filament

Prepare your filament spool for printing:

  • Open the filament compartment.
  • Insert the filament into the extruder inlet.
  • Use the touchscreen to feed filament through the extruder.
  • Wait until the filament extrudes smoothly.

Preparing Your First Print

Choose or design a simple model to test your setup. Follow these steps:

  • Transfer the print file to the printer via USB, SD card, or Wi-Fi.
  • Select the file on the touchscreen menu.
  • Adjust print settings if necessary, such as layer height and infill.
  • Start the print and monitor the initial layers for adhesion.

Monitoring and Finishing Your Print

Keep an eye on your print to ensure quality and troubleshoot if needed:

  • Check for proper adhesion and smooth extrusion.
  • Pause or cancel if issues arise, then troubleshoot accordingly.
  • Once complete, carefully remove the print from the bed.

Post-Print Maintenance

Maintain your Bambu Lab P1S 2026 for continued performance:

  • Clean the print bed and nozzle regularly.
  • Store filament in a dry environment.
  • Update firmware through the touchscreen interface when prompted.
  • Check for loose parts and tighten as necessary.

Congratulations! You are now ready to create your first 3D print with the Bambu Lab P1S 2026. Happy printing!