Table of Contents
Flying the Autel Evo Lite+ drone requires careful preparation to ensure safety and optimal performance. Following a comprehensive safety checklist before each flight can prevent accidents and extend the lifespan of your drone. This guide provides essential steps to review before every takeoff.
Pre-Flight Inspection
- Check the drone’s body for any physical damage or cracks.
- Inspect propellers for chips, cracks, or warping. Replace damaged propellers.
- Ensure all screws and fasteners are secure.
- Verify that the battery is properly seated and secured.
- Examine the camera and gimbal for any obstructions or damage.
Battery and Power Checks
- Fully charge the drone’s battery and remote controller.
- Check the battery level indicator for adequate charge.
- Inspect the battery for swelling or leaks.
- Ensure the SD card is inserted properly and has sufficient storage.
System and Software Verification
- Update the drone’s firmware to the latest version.
- Update the Autel Explorer app on your mobile device.
- Perform a system check to ensure all functions are operational.
- Calibrate compass and IMU if prompted or if flying in a new location.
Environmental Considerations
- Check weather conditions; avoid flying in high winds, rain, or fog.
- Ensure the flight area is clear of obstacles, people, and animals.
- Verify that you have permission to fly in the area, if required.
Safety Protocols During Flight
- Always maintain line-of-sight with the drone.
- Set a maximum altitude limit according to local regulations.
- Monitor battery levels throughout the flight and land before depletion.
- Be prepared to abort the flight if unexpected issues arise.
Post-Flight Procedures
- Power down the drone and remote controller properly.
- Remove and inspect the battery for any damage.
- Clean the drone, especially the camera lens and propellers.
- Download and back up flight data and footage.
- Store the drone in a safe, dry place away from extreme temperatures.
Adhering to this safety checklist ensures a secure and enjoyable flying experience with your Autel Evo Lite+. Regular maintenance and careful preparation are key to maximizing your drone’s capabilities and safety.