Upgrading the RAM and SSD on your MSI Stealth 15M can significantly improve its performance and extend its lifespan. This guide provides step-by-step instructions to help you perform these upgrades safely and effectively.

Tools and Parts Needed

  • Phillips-head screwdriver
  • Anti-static wrist strap
  • Compatible RAM modules
  • Compatible SSD (M.2 NVMe)
  • Plastic pry tools (optional)

Preparing for the Upgrade

Ensure the laptop is powered off and disconnected from any power source. Remove the battery if possible, and ground yourself using an anti-static wrist strap to prevent static damage to internal components.

Accessing the Internal Components

Place the laptop upside down on a soft surface. Use the Phillips-head screwdriver to remove the screws securing the bottom panel. Carefully pry open the panel using a plastic pry tool if necessary.

Locating RAM and SSD Slots

The RAM modules are typically located near the center of the motherboard, while the M.2 SSD slot is usually near the edge. Refer to the motherboard diagram if available.

Upgrading the RAM

Gently release the clips holding the existing RAM module. Carefully lift the module out at an angle. Insert the new RAM module at a 30-degree angle, then press down until it clicks into place.

Upgrading the SSD

Locate the M.2 slot and remove any screw securing the current SSD. Gently slide out the existing SSD. Insert the new SSD at an angle, then press down flat and secure it with the screw.

Reassembling the Laptop

Replace the bottom panel and secure it with the screws removed earlier. Reconnect the battery if it was disconnected. Power on the laptop to verify that the upgrades are recognized and functioning properly.

Final Tips

  • Handle components with care to avoid damage.
  • Use compatible RAM and SSD to ensure compatibility.
  • Update your BIOS and drivers after upgrading.
  • If unsure, consult a professional technician.